ZyXEL Communications GS1200-5HP v2 User Manual page 29

Table 1 System (continued)
LABEL DESCRIPTION
PoE MAX LED This field displays the point when the PoE MAX LED will turn on, indicating the Switch is reaching
Power its maximum power.
(GS1200-5HP v2 When the total power requested by the PoE-enabled devices exceeds the total PoE power
& GS1200-8HP budget on the Switch, the last PoE-enabled device connected to the Switch won't be powered
v2) up.
For example, the first PoE-enabled device connected to port 1 requires 20W, the second one
connected to port 2 requires 20W, and the third one connected to port 3 requires 25W. In this
case, the total power consumption is 65W which exceeds the maximum power the Switch can
supply. Therefore, the third PoE-enabled device won't be powered up as it was connected last.
Per Port Status
Port This identifies the Ethernet port on the Switch.
Link status This field displays the current status or speed (either 10 Mbps, 100 Mbps or 1000 Mbps) of each
port.
TX (Pkts) This field shows the number of transmitted frames on this port.
RX (Pkts) This field shows the number of received frames on this port.
Loop Status It displays Loop when the Switch detects a loop on the port. Otherwise, it displays Normal.
PoE Status (W) This field displays the amount of power the Switch is currently supplying to the PoE-enabled
device connected to the port.
(GS1200-5HP v2
& GS1200-8HP
v2)
Clear Click this button to clear the statistics in the TX(Pkts) and RX(Pkts) fields.
Refresh Click this button to update the information in this screen.
Chapter 1 System
GS1200 Series User's Guide
29