Figure 6 Port
The following table describes the labels in this screen.
Table 2 Port
LABEL
DESCRIPTION
Storm Control
Broadcast Storm
Enable traffic storm control on the Switch by specifying how many broadcast packets a port
Control
receives per second.
Loop Detection /
Select Loop Detection to allow the Switch to detect a loop on the port. The port becomes
Prevention
active when the loop disappears.
Select Loop Prevention to allow the Switch to shut down a port automatically when it detects a
loop on the port.The port becomes active when the loop disappears.
Select Off to disable this feature.
Apply
Click this button to save your changes to the Switch.
Port Setting
Port
This identifies the Ethernet port on the Switch.
State
Select Enable to enable the port or Disable to disable it.
Speed
Select the speed of the Ethernet connection on this port. The choices are Auto, 10 Mbps, and
100 Mbps.
Select Auto to have the Switch obtain the connection speed of up to 1000 Mbps.
Chapter 2 Port
GS1200 Series User's Guide
32