HP ProCurve 420 Installation And Getting Started Manual page 8

Introducing the hp procurve wireless AP 420 ww/na
Throughout this manual, this access point will be abbreviated as the
hp procurve wireless AP 420 ww/na.
The AP 420 ww/na has one 10/100Base-TX RJ-45 port. This port also
supports Power over Ethernet based on the IEEE 802.3af standard. The access
point supports wireless connectivity at speeds up to 54 Mbps based on the
IEEE 802.11g standard.
This access point is designed to be used primarily for connecting wireless
clients to an enterprise network. This access point allows wireless clients to
connect directly to each other, or to connect to other computers or network
resources located on the wired network. In addition, the Access Point 420wl
offers full network management capabilities.
This chapter describes your hp procurve wireless AP 420 ww/na including:
1-2
Top and back of the access point
Access point features