Preface - Siemens SIMATIC ET 200SP Manual

Preface

Purpose of the documentation
This manual supplements the system manual Distributed I/O System ET 200SP
(http://support.automation.siemens.com/WW/view/en/58649293).
Functions that affect the system in general are described in this system manual.
The information in this manual and the system/function manuals provide support when you
commission the system.
A description of the F-system SIMATIC Safety can be found in the programming and
operating manual SIMATIC Safety – Configuring and Programming
(http://support.automation.siemens.com/WW/view/en/54110126).
Conventions
CPU: When the term "CPU" is used in the following, it refers to both the CPUs of the
S7-1500 automation system as well CPUs / interface modules of the ET 200SP distributed
I/O system.
STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the
configuration and programming software " (STEP 7 TIA Portal)".
Note the following identified notes:
Note
A note includes important information on the product described in the documentation, on
handling the product or on the part of the documentation to which you ought to pay special
attention.
Standards
You can find a dated reference to the respective standards in the certificate
(https://support.industry.siemens.com/cs/ww/en/view/57141281) or in the EC Declaration of
Conformity (https://support.industry.siemens.com/cs/ww/en/view/71764057) for the
F-module.
Digital output module F-DQ 8x24VDC/0.5A PP HF (6ES7136-6DC00-0CA0)
Manual, 05/2017, A5E38578424-AA
3