5.3
Application: Wiring two loads in parallel to each digital output
The ground may be the internal ground M
SIL3/Cat.4/PLe.
To achieve SIL3/Cat.4/PLe see section Installation of the ground line between the power
supply and the BaseUnit (Page 26).
①
Backplane bus interface
②
Output electronics
③
Reverse polarity protection
Figure 5-2
Wiring diagram for two relays in parallel to a F-DQ of the digital output module F-DQ 8x24VDC/0.5A PP HF
Digital output module F-DQ 8x24VDC/0.5A PP HF (6ES7136-6DC00-0CA0)
Manual, 05/2017, A5E38578424-AA
5.3 Application: Wiring two loads in parallel to each digital output
or an external ground. This circuit achieves
n
④
Color-coded label with color code CC02 (optional)
⑤
Filter circuit supply voltage (available in light-colored
BaseUnit only)
Applications of the F-I/O module
29