Table of Contents
Advertisement
(6) Make sure that the Alarm indicator of SB#0 is not lit. (See "Figure 14.3.2".)
(7) Proceed to
SET1404000
14.4 Verifying operation
Confirm the TPM according to the following procedures.
(1) Connect the operation terminal.
See Appendix E.1
(2) Log in to the iRMC S5 Web from the operation terminal.
See Appendix E.2.1 "Login".
(3) Start Video Redirection.
See Appendix E.3.1
(4) Set "BIOS Setup" at "Boot Device Selector".
See Appendix E.4
(5) Turn on the system power.
See Appendix E.5.1
→ Wait for a few minutes until "Figure 14.4-1" is displayed. (Max. 10 minutes)
"14.4 Verifying
operation".
"Operation terminal
"Video Redirection
"Boot Device Selector
"Power
On".
Figure 14.3.2
connection".
start".
setting".
91
Advertisement
Table of Contents
