Table of Contents
Advertisement
SET1105020
11.5.2 Verifying operation (System Power Off)
Confirm the PSU according to the following procedures.
(1) Start Video Redirection.
See Appendix E.3.1
(2) Set "BIOS Setup" at "Boot Device Selector".
See Appendix E.4
(3) Turn on the system power.
See Appendix E.5.1
→ Wait for a few minutes until "Figure 11.5-1" is displayed. (Max. 10 minutes)
"Video Redirection
start".
"Boot Device Selector
setting".
"Power
On".
Figure 11.5.2-1
76
Advertisement
Table of Contents
