Table of Contents
Advertisement
SET0504000
5.4 Verifying operation
Confirm the PCI card according to the following procedures.
(1) Connect the operation terminal.
See Appendix E.1
(2) Log in to the iRMC S5 Web from the operation terminal.
See Appendix E.2.1 "Login".
(3) Start Video Redirection.
See Appendix E.3.1
(4) Set "BIOS Setup" at "Boot Device Selector".
See Appendix E.4
(5) Turn on the system power.
See Appendix E.5.1
→ Wait for a few minutes until "Figure 5.4-1" is displayed. (Max. 10 minutes)
(6) Download the SEL to the operation terminal. See Appendix E.8
(7) Unzip the "SystemEventLog.zip" then copy "config.txt" file onto desktop of the operation terminal.
(8) Open the "config.txt" with text editor.
A slot with (Install) indicates that the slot is populated, and (
"Operation terminal
connection".
"Video Redirection
start".
"Boot Device Selector
setting".
"Power
On".
Figure 5.4-1
"SEL
downloading".
) not populated.
43
Advertisement
Table of Contents
