Figure 7.4-1
(6) Download the SEL to the operation terminal. See Appendix E.8
"SEL
downloading".
(7) Unzip the "SystemEventLog.zip" then copy "config.txt" file onto desktop of the operation terminal.
(8) Open the "config.txt" with text editor.
A slot with (Install) indicates that the slot is populated, and (
) not populated.
Figure 7.4-2 Example
(9) Confirm that the DU_SAS installing HDD/SSD is displayed as "Install". (See "Figure 7.4-2".)
(10) Confirm that the HDD/SSD are displayed as "Install".
(See "Figure 7.4-2".)
(11) Confirm the amount of installed HDD or SSD same as the system administrator instructions.
(12) Make sure that orange indicator of the "System Alarm" and "CSS" are not lit or blinking.
(See "Figure 7.4-3".)
54