Preparation Of Handing Over To The System Administrator; Handover To The System Administrator - Cisco C880 M5 Service Manual

Hide thumbs Also See for C880 M5:
Table of Contents

Advertisement

(11) When FBU (BBU) option is installed, confirmation of FBU (BBU) status is necessary.
See Appendix E.10
(12) Make sure that orange indicator of the "System Alarm" and "CSS" are not lit or blinking.
(See "Figure 5.4-3".)
(13) Turn off the system power. See Appendix E.5.2
(14) Proceed to
SET0505000

5.5 Preparation of handing over to the system administrator

(1) End the Video Redirection. See Appendix E.3.2
(2) Logout of iRMC S5 Web. See Appendix E.2.2 "Logout".
(3) Remove the LAN cable connected for work.
(4) Reinstall all the covers and doors that were removed during the work.
(5) Clean them with a cleaning agent and waste cloth.
(6) Proceed to
SET0506000

5.6 Handover to the system administrator

(1) Close the doors of the rack and hand over the door key to the system administrator.
(2) When the setting of iRMC or BIOS has been temporarily changed for work, the setting change is
requested to the system administrator.
(3) The work is ended.
"FBU (BBU) status
"5.5 Preparation of handing over to the system
"5.6 Handover to the system
confirming".
Figure 5.4-3
"Power
Off".
administrator".
"Video Redirection
administrator".
45
end".

Advertisement

Table of Contents
loading

Table of Contents