SET0500000
5 Installing PCI Card
36
- This chapter describes the procedure for installing PCI card into the IOUB. When FBU is added,
it contains it.
- When installing PCI card and IOUB as a set, work according to chapter 10
"Installing I/O Unit B
- When installing SAS array controller card, work according to chapter 6
"Installing Disk Unit for SAS
- In this chapter, SB represents a System Board.
- In this chapter, IOUB represents I/O Unit B.
- In this chapter, FBU (BBU) represents FBU for Ext. SAS RAID Card.
SET0501000
5.1 Conditions for installing components
- When installing PCI card, SB must be installed as indicated by "Table 5.1".
- For example, when installing the PCI card in slot#4 of IOU#0, it is necessary installed SB in SB#1.
SB installation location
SB#0
SB#1
SB#2
SB#3
SET0501010
5.1.1 Firmware version
- No conditions.
SET0501020
5.1.2 Maximum installation amount
- 8 PCI cards per an IOUB.
SET0501030
5.1.3 Conditions concerning combined use of PCI card
-No conditions.
(IOUB)".
(DU_SAS)".
Table 5.1
IOUB installation location and PCI slot number
IOU#0
Slot#0,#1,#2,#3
Slot#4,#5,#6,#7
-
-
39
IOU#1
-
-
Slot#0,#1,#2,#3
Slot#4,#5,#6,#7