Seatbelt Height Adjustment; Seatbelt Warning Lamp And Indicator Chime - Ford C-MAX HYBRID 2018 Owner's Manual

3. Allow the belt to retract. As the belt
retracts, you will hear a clicking sound.
This indicates the seatbelt is now in the
automatic locking mode.
How to Disengage the Automatic
Locking Mode
Unbuckle the combination lap and
shoulder belt and allow it to retract
completely to disengage the automatic
locking mode and activate the vehicle
sensitive (emergency) locking mode.
SEATBELT HEIGHT
ADJUSTMENT
WARNING
Position the seatbelt height adjusters
so that the belt rests across the
middle of your shoulder. Failure to
adjust the seatbelt correctly could reduce
the effectiveness of the seatbelt and
increase the risk of injury in a crash.
Conditions of operation
The driver seatbelt is not buckled before
the ignition switch is turned to the on posi-
The driver seatbelt is buckled while the
indicator light is illuminated and the
warning chime is sounding...
The driver seatbelt is buckled before the
ignition switch is turned to the on position...
C-MAX / C-MAX Hybrid (CCG) Canada/United States of America, enUSA, First Printing
Seatbelts
If
tion...
To adjust the shoulder belt height, squeeze
the button and slide the height adjuster up
or down. Release the button and pull down
on the height adjuster to make sure it is
locked in place.
SEATBELT WARNING LAMP
AND INDICATOR CHIME
This lamp illuminates and an
audible warning will sound if the
driver seatbelt has not been
fastened when the vehicle's ignition is
turned on.
The seatbelt warning light illuminates and
the warning chime sounds for a few
seconds.
The seatbelt warning light and warning
chime turn off.
The seatbelt warning light and indicator
chime remain off.
33
Then