Maintenance; Warning; Battery Replacement; Cleaning - AEMC MR521 User Manual

AC/DC Current Probe Models MR411 & MR521

Maintenance

 For maintenance use only specified replacement parts.
 Avoid electrical shock: do not attempt to perform any servicing unless
you are qualified to do so.
 Avoid electrical shock and/or damage to the instrument: do not get
water or other foreign agents into the case. Turn the current probe
OFF and disconnect the unit from all circuits before opening the case.

Battery Replacement

When the probe is turned on, the green LED should light up. If it does
not, replace the 9V battery. Completely disconnect the probe from the
circuit under test and from the DMM or measuring instrument. Turn the
probe "Off", unscrew the battery compartment screw and remove cover.
Replace the battery and put the cover back on.
Do not replace the battery while the probe is in use.

Cleaning

Clean the body of the clamp with a cloth lightly moistened with soapy
water. Wipe clean with a cloth moistened with clean water and dry. Do
not use solvent.

Warranty

The Models MR411 and MR521 are warranted to the owner for a period of
two years from the date of original purchase against defects in
manufacture. This limited warranty is given by AEMC
the distributor from whom it was purchased. This warranty is void if the
unit has been tampered with, abused or if the defect is related to service
not performed by AEMC
Full warranty coverage and product registration is available on our
website at: www.aemc.com/warranty.html.
Please print the online Warranty Coverage Information for your
records.
®
What AEMC
warranty period, you may return the instrument to us for repair, provided we
have your warranty registration information on file or a proof of purchase.
®
AEMC will, at its option, repair or replace the faulty material.
®
Instruments.
Instruments will do: If a malfunction occurs within the
- 20 -
®
Instruments, not by