Controlling Access To The System Control Panel; System Control Panel Access Options - Dell USC User Manual

3 After USC reboots to the operating system installer CD/DVD, enter the
command: > linux dd
4 Insert the Driver Update Disk (DUD) when prompted, and specify the
location of the USB drive and press <Enter>.
5 Follow the on-screen instructions to complete the installation.

Controlling Access to the System Control Panel

To control access to the system control panel:
1 From the USC/USC-LCE Home page, select Hardware Configuration.
2 In the right pane, select Configuration Wizards
3 Click Physical Security Configuration.
4 Set System Control Panel Access to one of the following options:
• Disabled
• View Only
• View and Modify
5 Click Finish to apply the changes.
To return to the Configuration Wizards, click Back or click Cancel to exit.

System Control Panel Access Options

USC's physical security configuration enables an administrator to restrict
system control panel interface access. The options available are:
• Disabled — You do not have access to information or control, other than
the information displayed by the management controller, and you cannot
specify actions.
• View Only — You can move through the data screens to obtain
information using the system control panel interface.
View and Modify — You can obtain information and make changes using
•
the system control panel interface.
USC and USC-LCE Operations
57