Encrypting Unsecure Virtual Disks; Prerequisites - Dell USC User Manual

• Broadcom NetXtreme Gigabit Ethernet
• Broadcom 5709C NetXtreme II GigE
• Broadcom 5709C NetXtreme II GigE
• Broadcom 57710 NetXtreme II 10GigE
• Intel Ethernet X520 10 GBE Dual Port KX4-KR Mezz
• Broadcom 57712 (Dual Port) 10GigE
Important
• You can configure only one NIC at a time.
• Integrated Broadcom NICs are controlled both by the BIOS and by
settings stored on the device itself. As a result, the Boot Protocol field in
the HII of integrated NICs has no effect; this setting is instead controlled
by the BIOS on the Integrated Devices screen. To set integrated NICs to
an iSCSI or PXE boot mode, select System BIOS Settings, then select
Integrated Devices. On this screen, you will see a list of each embedded
NIC—select the appropriate value: Enabled for no boot capability,
Enabled with PXE to use the NIC for PXE boot, or Enabled with iSCSI
to use the NIC to boot from an iSCSI target.

Encrypting Unsecure Virtual Disks

Prerequisites

• Selected controller is security-capable
• Security capable virtual disks must be attached to the controller.
• Controller must be in Local Key encryption mode.
84
USC and USC-LCE Operations