Creating A Secure Virtual Disk On  Series 7 Controller - Dell USC User Manual

3 Click RAID Configuration to launch the wizard and do the following
tasks:
Select RAID
a
Select the non-RAID physical disks attached to the controller and
b
click Next to initialize them.
NOTE:
attached to it.
CAUTION:
deleted.
Select Advanced Wizard
c
Select Basic Settings
d
Advanced Wizard Only - Select Physical Disks
e
Advanced Wizard Only - Additional Settings
f
Advanced Wizard Only - Review Summary
g
Creating a Secure Virtual Disk on Series 7
Controller
NOTE:
The controller must be encrypted with a Local Key.
To create a secure virtual disk on series 7 controller, follow these steps:
1 In the left pane, click Hardware Configuration.
2 Select RAID Configuration and click Next.
The number of virtual disks present on every controller is displayed, along
with information on whether the virtual disk is secure.
3 Select the controller and click Next.
4 Select Advanced Wizard and click Next.
5 Select the required RAID level and click Next.
6 Select Self-encryption from the Encryption Capability drop-down. The
self-encryption disks (SEDs) are displayed.
7 Select the required physical disks and click Next.
80
USC and USC-LCE Operations
Controller.
This step is not available if the controller has no non-RAID disks
During initialization, all the data on the non-RAID disks are