Dell USC User Manual page 113

Table 5-3. USC-LCE Error Messages and Resolutions
Error Message
An error occurred. One or
more settings may not be
restored.
This feature is not
supported in this
configuration
NFS Support is not present Type the correct NFS share name and retry.
No Share Name/Details
present
Failed to authenticate.
Invalid share name,
username, or password.
Invalid Catalog File
Could not Connect the
Share
Network Share Mount
Failed
Requested operation
completed successfully.
Error occurred while
shutting down the system.
Shutdown manually.
One or more of following
links will be disabled if the
required hardware is not
present in the system.
Resolution
An error occurred when restoring Hardware Advanced
Configuration settings. To resolve this issue:
Reboot the system.
1
Re-enter USC-LCE by pressing the <F10> key.
2
Re-open the Advanced Configuration screen.
Your modular system does not support the feature you
selected.
Type the correct share name or username and password,
and retry.
Type the correct share name or username and password,
and retry.
Type the correct path to the catalog file, or the correct
catalog name.
This error may occur due to temporary network
problems. If this issue persists, check the network
connection and then retry.
This error may occur due to temporary network
problems. If this issue persists, check the network
connection and then retry.
Press the power button on the system to shutdown
manually.
Ensure that a healthy and licensed vFlash SD card is
present in the system.
Troubleshooting and Frequently Asked Questions
(continued)
113