Remote Management Controller Gui Explained; Logout; System Information - Dell PowerEdge C6145 Manual

Remote Management Controller GUI Explained

After you successfully log in to your Remote Management Controller, you are
greeted with the Remote Management Controller GUI.

Logout

Log out from your Remote Management Controller
The default timeout value is 30 seconds.

System Information

System Information
Click the System Information tab to view the Remote Management Controller.
The System Information tab enables you to view the System Power Status,
firmware revision, aux firmware revision, and build time.
Table 2-2. BMC Information
BMC Information
System Power Status
Firmware Revision
Aux Firmware
Revision
Build Time
Using the WEB UI
Description
On or Off
Remote Management Controller firmware revision.
Remote Management Controller firmware
aux revision.
Date the firmware was last built in the form:
MM DD YYYY HH:MM:SS
| 8