Table of Contents
Advertisement
Power, Status, and Peered LEDs
The front panel of the controller also includes Power, Status, and Peered LEDs (see
monitoring of the overall status of the controller. The following table describes the different behavior of these LEDs:
Table 12:
Power, Status, and Peered LEDs
LED
Function
Power
System Power
Status
System Status
Peered
Reserved for future use
LCD Panel
The W-7205 controller is equipped with an LCD panel that displays information about the controller's status, and
provides a menu that allows basic operations, such as initial setup and reboot. The LCD panel displays two lines of
text with a maximum of 16 characters per line. When using the LCD panel, the active line is indicated by an arrow
next to the first letter. The LCD panel is operated using the two navigation buttons to the right of the screen. See
Figure
4.
Menu— Allows navigation through the menus of the LCD panel
l
Enter— Confirms and executes the action currently displayed on the LCD panel
l
LCD Menu
The LCD menu includes four modes as shown in the following table:
Table 13:
LCD Panel Mode
LCD Mode
Boot
LED
Dell Networking W-7205 Controller | Installation Guide
Indicator
Green (Solid)
Off
Green (Solid)
Green (Blinking)
Amber (Blinking)
Amber (Solid)
Off
NA
Function
Displays boot status of the controller
Displays the mode of the STATUS
LED of ports.
The LED mode menu allows to
choose what information is
communicated by the STATUS LEDs
on each port. See
Table 5
for
descriptions of the LED behavior of
each mode.
Status
Power On
Power Off
Operational
Device is loading software
Major alarm
Critical alarm
No power
NA
Displayed Status/ Command
Booting ArubaOS...
LED mode: ADM
LED mode: DPX
LED mode: SPD
Figure
4) that provide basic
Description
Boot status of the controller.
Administrative– Displays
whether the port is
administratively enabled or
disabled
Duplex– Displays the duplex
mode of the port
Speed– Displays the speed of
the port.
W-7205 Controller | 17
Advertisement
Table of Contents
