Dell USC User Manual page 29

components (for example, fans, PCI devices, NICs, DIMMs, PSU, and so on),
and their properties and values. From the Filter by Hardware Component
drop-down menu, select the hardware component to view its properties and
values. You can export this information in the XML format into a USB Device
or Network Share. The XML file is saved in this format -
HardwareInventory_<servicetag>_<timestamp>.xml.
For more information on the easy-to-use names of the hardware components,
see Table B-1.
NOTE:
Incorrect inventory data is displayed or exported after performing Delete
Configuration and Reset Defaults. See
after Resetting Lifecycle Controller
See Also:
• Viewing Hardware Inventory–Current or Factory Shipped
• Exporting Hardware Inventory–Current or Factory Shipped
About View and Export Factory Shipped Inventory
You can view the hardware information about the factory installed hardware
components and their configuration. The table lists all the factory installed
hardware components (for example, fans, PCI devices, NICs, DIMMs, PSU,
and so on), and their properties and values. From the Filter by Hardware
Component drop-down menu, select the hardware component to view its
properties and values. You can export this information in this XML format
into a USB Device, or Network Share, or both the locations.
For more information on the easy-to-use names of the hardware components,
see Table B-1.
View and Export factory shipped inventory feature may be grayed-out on the
system due to one of the following:
• This feature requires factory installed data. Although the current version
supports this feature, the factory installed data is not present on the
system.
• Delete Configuration and Reset Defaults was applied and this has
permanently deleted the Factory Shipped Inventory.
Viewing and Exporting Hardware Inventory
for displaying correct inventory data.
USC and USC-LCE Features
29