Table of Contents
Advertisement
Replacing bulbs
89
,... Turn bulb holder
CD
anti-clockwise and
Front foglamps
remove .
,... Take the bulb out of bulb holder
CD.
,... Insert the new bulb into bul b holder
CD.
,... Insert bulb holder
CD
and turn it clock-
wise until it engages.
,... To fit the cover in the front wheel arch:
insert cover @ again and l ock in place .
Dipped-beam/main-beam headlamps
?82.1().7414-31
,... Switch off the lights.
,... Open the service cover
(I>
page 190).
,... Remove cover
CD.
,... Pull out the connector.
,... Simultaneously press retainer @
forward and to the right and then remove
the lamp.
,... Insert the new bulb and engage it in
place.
,... Insert t he connector.
,... Position cover
CD
and press into place .
?82.1().7325-3 1
Due to their location, have the bulbs in the
front fog lamps changed at a qualified spe-
cial ist workshop.
,... Switch off the lights .
,... Remove the two screws
CD
at the bottom of
the front wheel arch using a suitable
tool.
,... Bend back the cover using your hand.
,... Turn the bulb holder anti-clockwise and
remove it.
,... Take the bulb out of the bulb holder.
,... Insert the new bul b into the bulb holder.
,... Insert the bulb holder and turn it clock-
wise until it engages.
,... Bend the cover back into position.
,... Tighten the two screws
CD
again.
I
Advertisement
Table of Contents
