On-Board Computer With A Colour Display; Current Fuel Consumption; Setting The Time - SMART Fortwo Owner's Manual

.
r-4
c.
Ill
·.-4
"0
"0
s::
ns
I-I
(1)
c.
=
0
u
0
,Q
I
s::
0
A
A
I
Displays and operation
shows the trip meter data or the current
fuel consumption.
Press and hold the
@KJ
button on the
multifunction lever.
The trip meter value or the eco score
display flashes for approx. 3 seconds.
The data is then reset.
The count in the eco score display only
reappears once a distance of approx.
400
m has been covered. If the ignition
remains switched off for longer than four
hours, the eco score display in the on-
board computer will be automatically
reset.
When the value has been reset, release
the
@KJ
button.
If
you release the
I
OK
I
button earlier,
the data shown will not change.
Current fuel consumption
When the vehicle is stationary or up to a
speed of approximately
5
km/h, the display
shows t he current fuel consumption as a
numeric value in 1/h.
Setting the time
press the
I I
button on the
multi function l ever until the display
shows the symbol alongside the
time.
Press and hold the
@KJ
button on the
multifunction lever until the hour value
flashes.
Press
liE I
to set the hour and confirm
the sel ection with
@KJ.
The minute value flashes .
Press
IrE I
to set the minutes and
I
OK
I
to
confirm the selection.
The display will show the time sel ected.
0
If the
I I
button on the multifunction
lever is pressed and held when setting
the time, the numerical values will
change continuously.
On-board computer with a colour dis-
play
Operating the on-board computer
G) Colour display
®
Left control panel
activate the on-board computer:
unlock the vehicle and open a door.
If
you do not subsequently l ock the door,
the on-board computer will remain
active for approximately
15
minutes
without any further activity.
or
the key to position
1
in the ignition
lock.
You can control the display and the settings
in the on-board computer using the steer-
ing wheel buttons on left control panel@.