Combination switch (high beam, high-beam flasher and turn signals)
Combination switch (high beam, high-
beam flasher and turn signals)
X
Make sure the key is in starter switch
position 1.
High beam and high‑beam flasher
Combination switch
High beam
1
High‑beam flasher
;
Turn signals
Combination switch
Turn signals, right
:
Turn signals, left
;
i
To signal minor directional changes
such as changing lanes, push the
combination switch only to the point of
resistance and release. The
G
Risk of injury
corresponding turn signals will flash
three times.
Windshield wipers
Switching windshield wipers on and off
Wiper switch
Windshield wipers off
u
Intermittent wiping
1
Slow continuous wiping
2
Fast continuous wiping
3
! Do not operate the windshield wipers
when the windshield is dry. Dust that
accumulates on a windshield might
scratch the glass and/or damage the
wiper blades when wiping occurs on a dry
windshield. If it is necessary to operate
the windshield wipers in dry weather
conditions, always operate the
windshield wipers with windshield
washer fluid.
Make sure that you read the detailed Operator's Manual. You
could otherwise fail to recognize dangers, which could result
in injury to yourself and/or others.
17
Z