Additional Instruments On The Dashboard; On-Board Computer With A Monochrome Display - SMART Fortwo Owner's Manual

Hide thumbs Also See for Fortwo:
Table of Contents

Advertisement

I
Di splays and operati on
Addi tional instruments on the dash-
board
----
D
Do not drive in the overrevving r ange.
Doing so will damage the engine .
Environmental note
Avoid excessive engine speeds. This
unnecessarily increases the fuel consump-
tion of your vehicle and harms the envi-
ronment as a result of increased emissions.
The overrevving range of the engine is
shown with dashed lines in the orange
marking of rev counter
G) .
The fuel supply
is interrupted to protect the engine when
the overrevving range is reached.
Dashboard clock@ is synchronised with
the clock in the on-board computer.
Rev counter
G),
together with dashboard
clock@, can be rotated approximately 60°
on the dashboard.
For vehicles with a colour display, you can
also set the brightness of the instrument
cluster lighting to different levels
(I>
page 146) .
On-board computer with a monochrome
display
Operating the on-board computer
CD
Monochrome display
®
Buttons on the multi function lever
.,.. To activate the on-board computer:
or
unlock the vehicle and open a door.
If you do not subsequently lock the door,
the on-board computer will remain
active for approximately 15 minutes
without any further activity.
.,.. Turn the key to position
1
in the ignition
lock .
You can control the display and t he settings
in the on-board computer using buttons @
on the multifunction lever.

Advertisement

Table of Contents
loading

Table of Contents