Table of Contents
Advertisement
Illustration of variant 2
Variant 1:
Slide the right-hand front seat to its
rearmost position.
Turn handwheel
CD
forward until the
desired seat backrest position is ach-
ieved
Variant 2:
Slide the right-hand front seat to its
rearmost position.
Hold onto the backrest at the head
restraint with one hand .
Pull rel ease lever
G).
The backrest is released.
Fold the backrest forwards.
Folding back
&
WARNING
If
the seat backrest is not engaged, it may
fold forwards, e.g. during braki ng or in the
event of an accident.
• As
a resul t, a backrest which is not
engaged would press you into the seat
belt. The seat belt cannot perform its
intended protective function and could
additionally cause injury.
• The backrest cannot restrain objects or
l oads in the boot.
This poses an increased risk of injury.
Before every journey, make sure that the
backrest is engaged as described.
Seats
77
Variant 1:
Turn handwheel
CD
back until the desired
seat backrest position is achieved
Variant 2:
release lever
G) .
The backrest is released.
the backrest backwards.
Ensure that the seat backrest is engaged
again.
SWitchi ng the seat heating on/off
Switching on/off
&
WARNING
If
you repeatedly switch on seat heating,
the seat cushion and backrest padding may
become very hot. The health of vehicle
occupants with limited temperature sensi-
tivity or a limited ability to react to
excessively high temperatures may be
affected or they may even suffer burn- like
inj uries. There is a risk of injury.
Therefore, do not switch on the seat heating
repeatedly.
Turn the key to position
2
in the ignition
lock([> page
ill).
swit ch
on:
press button@.
Indicator lamp
CD
in the button lights
up.
swi tch off: press button@.
Indicator lamp
CD
in the button goes out.
I
Advertisement
Table of Contents
