Seat Heating Problem - SMART 2016 fortwo Owner's Manual

Folding back
G
WARNING
If the seat backrest is not engaged, it may
fold forwards, e.g. during braking or in the
event of an accident.
As a result, a backrest which is not
R
engaged would press you into the seat
belt. The seat belt can no longer offer the
intended level of protection and can even
cause injuries.
The backrest cannot restrain objects or
R
loads in the trunk.
There is an increased risk of injury.
Before every journey, make sure that the
backrest is engaged as described.
Variant 1:
Turn handwheel : back until the desired
X
seat backrest position is achieved
Variant 2:
Pull release lever :.
X
The backrest is released.
Fold the backrest backwards.
X
Ensure that the seat backrest is engaged
X
again.
Switching the seat heating on/off
Activating/deactivating
G
WARNING
Repeatedly switching on the seat heating
can cause the seat cushion and backrest
Problems with the seat heating
Problem
The seat heating has
switched off prema-
turely or cannot be
switched on.
pads to become very hot. The health of per-
sons with limited temperature sensitivity
or a limited ability to react to excessively
high temperatures may be affected or they
may even suffer burn-like injuries. There
is a risk of injury.
Therefore, do not switch the seat heating on
repeatedly.
Turn the SmartKey to position 2 in the igni-
X
tion lock (
To switch on: press button ;.
X
Indicator lamp : in the button lights up.
To switch off: press button ;.
X
Indicator lamp : in the button goes out.
i
heating may switch off.
The seat heating switches off automati-
cally after about 10 minutes.
Possible causes/consequences and M Solutions
The on-board voltage is too low because too many electrical con-
sumers are switched on.
Switch off electrical consumers that you do not need, such as the
X
rear window defroster or interior lighting.
Once the battery is sufficiently charged, the seat heating will
switch back on automatically.
page 86).
Y
If the battery voltage is too low, the seat
Seats
65
Z