Table of Contents
Advertisement
6.1.2
After opening the program this should be the view of the new window:
6.1.3
Connect your MAX1000 board to your PC using a USB cable. The Arrow USB Programmer2
driver software should already be installed, if not please refer to Chapter 4.2 (Windows
based operating system) or 4.4 (Linux based operating system) for installing the drivers.
After plugging in the MAX1000, the green LED should also light up indicating power on, along with
a brief flash of the red LED CONF_DONE.
In the Window's Device Manager should display the following entries that are highlighted in red.
MAX1000 User Guide
Page | 65
www.arrow.com
July 2017
Advertisement
Table of Contents
