5.2.8.5 Right click on the output bus of the simple counter that you just created and select
"Properties".
Set the name of the bus to: counter[31..0]
The view of the "Bus Properties" should look like this:
5.2.8.6 Do the same for input buses of the mux:
Name the top bus input:
Name the bottom bus input:
Schematic should look like this:
MAX1000 User Guide
data1x[7..0] counter[24..31]
data0x[7..0] counter[19..26]
Page | 51
www.arrow.com
July 2017