Arrow MAX1000 User Manual page 59

The window should now look like this:
Note that the Location of the CLK12M is now set to Location PIN_H6 (as seen in blue colour in the
top view of the FPGA).
5.2.11.3 The other pins need to be assigned as well. Just like previously set all the pins to their
appropriate locations using the table below, by either drag and drop or writing
manually the location.
MAX1000 User Guide
Node Name Pin Location
LED[7] PIN_D8
LED[6] PIN_C10
LED[5] PIN_C9
LED[4] PIN_B10
LED[3] PIN_A10
LED[2] PIN_A11
LED[1] PIN_A9
LED[0] PIN_A8
USER_BTN PIN_E6
Page | 59
www.arrow.com
July 2017