Arrow MAX1000 User Manual page 54

5.2.8.13 Add one output pin for the LEDs.
5.2.8.14 Rename the pin to LED[7..0].
5.2.8.15 Using the "Bus Tool", make the connection between counter_mux component and
output pin:
result[7..0]  LED[7..0]
The final schematic should look like the following:
Looking at the schematic, even though the buses are not connected together by wires, the names
of counter tell Quartus Prime to connect the signals together. Overall, the user button will toggle
between displaying higher 8 bits of the counter and 8 lower bits of the counter. The signals of the
counter that are not connected will not be used by Quartus Prime.
5.2.8.16 Save your design
Open the File Menu and select "Save". Save it as top.bdf
MAX1000 User Guide
Page | 54
www.arrow.com
July 2017