Arrow MAX1000 User Manual page 23

Note: In case of browser issues using Akamai DLM3 Manager, you can alternative download the
above files using the "Direct Download" (highlighted in green).
4.1.6 After the download is finished, run the Quartus Prime installer.
4.1.7 When prompted to select the components, the installer will detect automatically the
MAX10 device support and ModelSim packages when they are in the same folder. Make
sure these components are selected:
4.1.9 Finish the installation of the Quartus Lite and proceeded to the next section to install Arrow
USB Programmer2 to be able to connect to the MAX1000 board.
MAX1000 User Guide
Page | 23
www.arrow.com
July 2017