Arrow MAX1000 User Manual page 62

5.2.12.3 The next step is to compile and complete the design. This step will verify that there are
no errors, create internal databases, and create programming files that will be used in
the next steps.
To compile the design, select Processing  Start Compilation or through the button as show
below:
If there are errors, they will need to be resolved and re-compiled before the design can be
programmed to the board. When Compiling finishes and there are no errors, there will be a
message at the bottom of the window that states: Full Compilation was successful and a 100%
indication along with the compile time in the right bottom corner.
MAX1000 User Guide
Page | 62
www.arrow.com
July 2017