Setting The Digipeater Route Full 1 And Full 2 Addresses - Yaesu FTM-400DR Instruction Manual

Using the APRS Set-up Menu
4
Select and touch the specific address number to be
registered
The character input screen will be displayed.
5
Touch the character keys to enter the information
The touched character will be displayed at the top of
the screen.
6
Touch [ENT]
7
Press for one second or longer
The specific address information of the digipeater
route PATH 1 will be set and the display will return to the previous screen.

Setting the digipeater route FULL 1 and FULL 2 addresses

After selecting FULL 1 under [APRS]
enter the specific address information (call sign and ALIAS).
A maximum of up to 8 addresses can be specified.
Tip The address for [22 DIGI PATH FULL 2] can also be set in the same way as follows.
Tip
This will become void even when "PROPORTIONAL" is set to ON under [APRS]
TX] in the set-up menu.
1
Press for one second or longer
The set-up menu will be displayed.
2
Select and touch [APRS]
3
Select and touch [21 DIGI PATH 1]
A list of the specific address information will be
displayed.
[16 DIGI PATH SELECT] in the set-up menu,
84
[15 BEACON