Yaesu FTM-400DR Instruction Manual page 42

1
Press for one second or longer
The set-up menu will be displayed.
2
Select and touch [APRS]
The menu list will be displayed.
3
Select and touch [30 SmartBeaconing] twice
The detailed setting screen will be displayed.
4
Touch [1 STATUS] to select "TYPE 1"
Each time this is touched, the setting will switch
between "OFF", "TYPE 1", "TYPE 2" and "TYPE 3".
Tip When "TYPE 1", "TYPE 2" and "TYPE 3" is selected,
settings from [2 LOW SPEED] to [8 TURN TIME] are
enabled.
5
Press for one second or longer
The SmartBeaconing™ operating method will be set
and the display will return to the previous screen.
6
Press
The function menu will be displayed.
7
Select and touch [BEACON]
Tip When [BEACON] is not displayed, touch [BACK] and
[FWD] to switch the function menu.
The " " icon will be displayed at the top right of the
screen, and automatic transmission using
SmartBeaconing™ will start.
Tip This will also be reflected under [APRS]
[AUTO] in the set-up menu.
TX]
Tips
• The default TYPE 1 - TYPE 3 settings are the same when shipped from the factory. When operating
SmartBeaconing™ under a different setting, select "TYPE 2" or "TYPE 3" in Step 4 and then change
the setting under [2 LOW SPEED] - [8 TURN TIME].
• When SmartBeaconing™ is in operation, all INTERVAL, PROPORTIONAL, DECAY, LOW SPEED
and RATE LIMIT settings under [APRS]
*SmartBeaconing TM
Transmitting APRS Beacons
[15 BEACON
[15 BEACON TX] in the set-up menu will become void.
is a function provided by HamHUD Nichetronix.
41