Deciding The Operating Band - Yaesu FTM-400DR Instruction Manual

Deciding the operating band

Although the APRS is set to operate in Band B when shipped from the factory, Band A
and also separate operating bands can be used for sending and receiving.
1
Press for one second or longer
The set-up menu will be displayed.
2
Select and touch [DATA]
The menu list will be displayed.
3
Touch and select [2 DATA BAND SELECT]
The screen for the detailed settings will be
displayed.
4
Touch [APRS] to select the band to be used for
APRS operation
The band changes as follows each time [APRS]
touched.
"A-BAND FIX": Always send and receive using Band
"B-BAND FIX": Always send and receive using Band B.
"A=TX/B=RX": Send using Band A and receive using Band B.
"A=RX/B=TX": Receive using Band A and send using Band B.
"MAIN BAND": Send and receive using the operating band at that point.
"SUB BAND": Send and receive using the sub-band at that point.
Tip Factory default value: B-BAND FIX
5
Press for one second or longer
The operating band will be set and the display will return to the previous screen.
A.
Starting APRS Operation
15