Smart Card Reader Use; Magnetic Card Reader Use; Contactless Transactions - VeriFone P400 Installation Manual

Smart Card
Reader Use
Conducting a Smart
Card Transaction
CAUTION
Magnetic Card
Reader Use
Conducting a Credit/
Debit Card
Transaction
Contactless
Transactions
The junction box comes in these configurations:
Cable
Ethernet with RS232
Ethernet with RS232
and Mini USB option
Ethernet with RS232
and Mini USB option
The smart card transaction procedure can vary depending on the application.
Verify the proper procedure with your application provider before performing a
smart card transaction.
To conduct a smart card transaction:
1
Position the smart card with the gold contacts facing upward.
2
Insert the card into the smart card reader slot in a smooth, continuous motion
until it seats firmly.
3
Remove the card when the display indicates the transaction is completed.
Leave the smart card in the card reader until the transaction is completed.
Premature removal can void the transaction.
The P400 has a magnetic card reader that uses a triple track stripe reader. This
gives the unit greater reliability over a wide range of swipe speeds and operating
environments.
To conduct a credit or debit card transaction:
1
Position a magnetic card with the stripe facing the keypad.
2
Swipe it through the magnetic card reader.
The P400 supports contactless transactions through an integrated contactless
module. The terminal only becomes active for contactless smart card transactions
when initialized by an application.
Configuration
Junction box with RJ-45 socket (for
connecting PINPad to LAN
infrastructure), Mod-10 socket &
DC-in jack
Junction box with RJ-45 socket (for
connecting PINPad to LAN
infrastructure), Type B socket, Mini
USB & DC-in jack
Junction box with RJ-45 socket (for
connecting PINPad to LAN
infrastructure), Type B socket, Mini
USB, type A USB & DC-in jack

Smart Card Reader Use

Part Number
CBL282-006-01-B
CBL282-005-01-B
CBL282-044-01-B
P400/P400 PLUS I
NSTALLATION
S
ETUP
17
G
UIDE