Usb-Download Support Using An External Power Brick; Ethernet Connection With External Power Brick - VeriFone P400 Installation Manual

Hide thumbs Also See for P400:
Table of Contents

Advertisement

S
ETUP
Cable Connections
RS-232 Connection
Using an External
Power Brick
Direct USB
Connection
USB–Download
Support using an
External Power
Brick
NOTE
WARNING
Ethernet
Connection with
External Power
Brick
16
P400/P400 PLUS I
NSTALLATION
A special dongle cable is used, where one end of the cable plugs into the P400
while the other end terminates in a DB-9 connector housing. On the housing, a
DC jack is provided to connect to an external power brick. This is a generic cable
for all RS-232-based hosts (VPN - CBL282-031-XX-A).
Similarly, a USB cable (VPN - CBL282-038-XX-A) is required in standard USB
environments. For this cable option, the host end has a molded housing which
exposes the standard USB plug.
The P400 can connect to other devices via USB while still being connected to an
external power brick through the following cable configurations:
USB Connection via Junction Box Cable
This cable option (VPN -
provides a mini-style Type B USB socket for connecting to the USB-based host
and a DC jack for external power connection. In addition, a Type A USB socket is
provided on the junction box to support application download via a USB thumb
drive.
USB Connection via PoweredUSB Connection Cable
A PoweredUSB cable allows for devices to obtain power through their USB host
instead of requiring an independent power supply or external AC adapter.
Connect the cable (VPN - CBL282-033-01-A) to the P400 and plug the male USB
connector into the corresponding USB port of the connecting device.
There are two variants of PoweredUSB, one with 12 V DC output and another with
24 V DC. P400 only supports 12 V DC option.
Power Sequence in USB Connection
When the unit connected is a USB Host, ensure that it is powered on prior to
connecting the USB Device.
Incorrect power sequence may degrade the SoC Host port.
To connect the terminal to other devices via ethernet, use the cable with a junction
box that provides a standard RJ-45 LAN socket, a mini USB port, and a standard
DC jack for an external power connection.
G
UIDE
) comes with a junction box that
CBL282-044-01-B

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

P400 plus

Table of Contents