Table of Contents
Advertisement
To mount the
unit
Figure: 7 Mounting the
UX700
Using the
Smart Card
Reader
To Conduct a
Smart Card
Transaction
Align the UX700 stud holes with the holes on the mounting surface.
1
Place the reader flush onto the mounting slot.
2
Secure the unit with M4 Washer and Screws. Tighten the Screws using the
recommended torque of 7.0 kg-cm (6.1 lbf.in).
Insert the smart card to proceed with the EMV transaction. EMV supports
credit card and debit card transactions.
1
Position the smart card with the contacts facing upward (see
2
Insert the card into the reader slot in a smooth, continuous motion until it sits
firmly.
Installation Guide
UX700
).
Figure 8
17
© VeriFone, Inc. All rights reserved.
Advertisement
Table of Contents
