Disassembling The Hand Piece - aoyue Int936A Instruction Manual

DISASSEMBLING THE HAND PIECE

The hand piece may be disassembled for trouble shooting and repair:
1. Turn off main station and unplug from power source.
2. Detach the Soldering Iron Receptacle ("
figure below) from the main unit.
"1"
3. Turn the Copper Nut, (
clockwise to loosen it.
"2"
4. Pull out the Tip Enclosure (
Solder Tip ("3" as shown in the figure below) , and the Tip Lock
("4" as shown in the figure below).
5. Turn the Plastic Nut ("5" as shown in the figure below) counter
clockwise to release it from the main body.
6. Push out the Heating Element ("6" as shown in the figure below)
via the Wire Cord ("14" as shown in the figure below).
10
15"
as shown in the
as shown in the figure below) counter
as shown in the figure below), the
TROUBLESHOOTING CONNECTIONS
Additional notes:
Proper connections table:
For Int936A / 936A :
PIN CORD COLOR
1 RED
2 BLUE
3 BLACK
4 GREEN
5 WHITE
For Int936 / 936 :
PIN CORD COLOR
1 RED
2 BLUE
3 BLACK
4 GREEN
5 WHITE
CORD COLOR Heating element
RED RED
BLUE RED
BLACK SPRING
GREEN BLUE
WHITE BLUE
CORD COLOR Heating element
RED RED
BLUE RED
BLACK SPRING
GREEN BLUE
WHITE WHITE
15