Inputs - Fluke 43 User Manual

Inputs

Figure 4. Measurement Connections
INPUT 1: Use the red test lead on input 1 (
COM : Use the black test lead on the COM input (
Use these inputs for all voltage measurements, and for Ohm, continuity, diode
capacitance and temperature measurements.
The Fluke 43 common inputs
black COM input) are connected internally via self-recovering fault protection.
INPUT 2: Use the 80i-500s AC current probe on input 2 (
Use this input only for current measurements. Use the BB120 banana-to-BNC
adapter to connect the current probe.
If you use other test leads or probes, change the probe settings in the
instrument setup menu (see "Selecting Probes").
Introducing the Fluke 43
).
(red INPUT 1 shield, gray INPUT 2 shield, and
Note
1
Inputs
COM).
).
7