Fluke 43 User Manual page 21

Table 1. Harmonics- and Power Settings
HARMONICS settings
%r
Displays harmonics as a percentage
of the total harmonic voltages
(total Vrms value).
%f
Displays harmonics as a percentage
of the fundamental voltage.
DC..21 Displays the DC component
DC..33 of the signal and 21, 33 or
DC..51 51 harmonics.
Introducing the Fluke 43
Instrument Setup
POWER settings
FUNDAMENTAL
Uses only the fundamental voltage
and fundamental current for power
calculations.
FULL
Uses the voltage and current of the
full frequency spectrum for power
calculations.
For signals with harmonics, power
readings with selected, will
FULL
differ from power readings with
selected.
FUNDAMENTAL
1
17