In order to use your projector wirelessly, you need to complete the steps below:
Install the wireless antenna. See "Installing the Antenna" on page 12.
Enable wireless connection on the projector. See "WIRELESS / NETWORK"
on page 55.
When you start wireless, please wait about 50 seconds reboot the
Wireless / Network.
On INPUT SELECT menu, select Multiple Display and then select Wireless
display on sub-menu. See "INPUT SELECT" on page 45. The Wireless Guide
Screen shown below appears.
Take note of the LOGIN CODE, NETWORK NAME (SSID), and IP
ADDRESS. You will need these information to login later.
Connect your computer to the S300wi network.
Using Your Projector