Dell S300wi User Manual page 56

L —Allows you to set the language for the OSD. Press
ANGUAGE
Language menu.
P M —Allows you to select the projector mode, depending upon how
ROJECTOR ODE
the projector is mounted.
• Front Projection-Desktop — This is the default option.
• Front Projection-Wall Mount — The projector turns the image upside down
for wall-mounted projection.
• Rear Projection-Desktop — The projector reverses the image so that you can
project from behind a translucent screen.
• Rear Projection-Wall Mount — The projector reverses and turns the image
upside down. You can project from behind a translucent screen with a wall-
mounted projection.
NOTE:
Doesn't recommend to enable the Interactive function on rear projector
condition.
V. K —Manually adjust the vertical image distortion caused by tilting the
EYSTONE
projector.
3D DISPLAY—Select on to start the 3D display function. Default is off.
to activate the
Using Your Projector 53