WIRELESS / NETWORK
The Wireless / Network menu allows you to configure the network connection
DHCP ADDRESS—If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select DHCP
On. If DHCP is Off, manually set the IP Address, Subnet Mask, and Gateway. Use
to select the number of IP Address, Subnet Mask, and Gateway. Key in
Enter to confirm each number and then use
—Automatically or manually assigns the IP address to the projector
connected to the network.
—Configure the Subnet Mask of the network connection.
—Check the Gateway address with your network/system administrator if
you configure it manually.
DNS—Check the DNS Server IP address with your network/system administrator
if you configure it manually.
to save the changes made in network configuration settings.
button to select IP Address, Subnet Mask, Gateway, DNS and
button to enter IP Address, Subnet Mask, Gateway or DNS to set
the value. (The selected option is highlighted in yellow)
After the setup is complete, press the
button to select the option.
button to set the value.
button to exit.
to set the next item.
Using Your Projector