Letter - UTStarcom UT611 User Manual

Input Method
4. Enter symbols: When no word is underlined, press
symbol list. Press
soft key

6.4 Letter

Switch to Letter input method;
corner of the screen.
1. Press 2
respective key. To input a letter, press the corresponding key
repeatedly until the letter appears.
For example: if you press
in turn:
- The letter just entered will be underlined. When the letter is
underlined, press
2. After you have entered the intended letter, press any other key on the
keypad to input the next letter. If the next letter and current letter share
the same key, press the left soft key
underline, and then enter the next letter; or simply wait for one second
to input again. Press
space.
3. Enter symbols and spaces: After the underline disappears, press
to display the symbol list. Press
and then press the left soft key
enter a space.
70
to highlight the intended symbol. Press the left
to enter this symbol.
9
~ to enter the corresponding letter labeled on the
2
to switch between upper and lower cases.
to confirm the current letter input and enter a
0
will be displayed at the lower left
repeatedly, the following letters appear
(Ok) or
to highlight the intended symbol,
to enter this symbol. Press
1
to display the
to remove the
1
to
0