Letter - UTStarcom Vonage F1000 series Handbook

Input Method

5.4 Letter

Switch to Letter input method;
of the screen.
1. Press
respective key. To input a letter, press the corresponding key
repeatedly until the letter appears.
For example: if you press
appear in turn:
- The letter just entered will be underlined. When the letter is
underlined, press
press the right soft key
2. After you have entered the intended letter, press any other key on the
keypad to input the next letter. If the next letter and current letter
share the same key, press the left soft key
the underline, and then enter the next letter; or simply wait for one
second to input again. Press
and enter a space.
3. Enter symbols and spaces: After the underline disappears, press
to display the symbol list. Press
and then press the left soft key
Press to enter a space.
4. When no letter is underlined, press
right soft key
cursor; press and hold the right soft key
characters; press
70
- to enter the corresponding letter labelled on the
to switch between upper and lower cases;
(Clear) to delete the character to the left of the
to switch input methods.
will be displayed at the lower left corner
repeatedly, the following letters
(Clear) to delete the letter
to confirm the current letter input
to highlight the intended symbol,
to enter the selected symbol.
to move the cursor; press the
(Ok) or to remove
(Clear) to delete all