Letter - UTStarcom F1000 Getting Started

Input Method

5.4 Letter

Switch to Letter input method;
of the screen
1. Press
respective key. To input a letter, press the corresponding key
repeatedly until the letter appears
For example: if you press
appear in turn:
- The letter just entered will be underlined. When the letter is
underlined, press
press the right soft key
2. After you have entered the intended letter, press any other key on the
keypad to input the next letter. If the next letter and current letter share
the same key, press the left soft key
underline, and then enter the next letter; or simply wait for one second
to input again. Press
a space
3. Enter symbols and spaces: After the underline disappears, press
to display the symbol list. Press
and then press the left soft key
4. When no letter is underlined, press
right soft key
press and hold the right soft key
press
72
Keison Products www.keison.co.uk sales@keison.co.uk Tel: +44 (0)1245 600560
~ to enter the corresponding letter labeled on the
to enter a space
(Clear) to delete the character to the left of the cursor;
to switch input methods
w ill be displayed at the lower left corner
repeatedly, the following letters
to switch between upper and lower cases;
(Clear) to delete the letter
(Ok) or
to confirm the current letter input and enter
to highlight the intended symbol,
to enter the selected symbol. Press
to move the cursor; press the
(Clear) to delete all characters;
to remove the