Ip Setting - UTStarcom UT611 User Manual

Menu
Contrast
Select this option to adjust the LCD's contrast.
There are six contrast levels. Press
decrease the contrast. The screen display will reflect the contrast setting.
After reaching the desired contrast level, press the left soft key
to complete the operation.

4.4.8 IP Setting

Menu
Settings IP Phone
This option enables you to configure the IP Phone function. After you set
this function, you can make an IP call by pressing and holding
"Make an IP Call"). This function requires network support.
After accessing this option, observe the following steps;
1. Enter the IP access number (Access No.) and the language code, for
example, "17908P1P". Press the left soft key
- According to different response time from the network server, you
can enter one or more pause symbols "P"s (each "P" means a
pause for approximate 1.5 seconds) by pressing and holding
coincide with the server's response time. A maximum of 14 digits
(including "P"s) can be entered.
2. Enter the IP account number (Accounts), and then press the left soft
key (Ok).
- According to the network requirements, if a "#" is required for the
account number, you can simply press
hold
(including "P"s and "#"s) can be entered.
54
to input the pause symbol "P". A maximum of 24 digits
to increase or
(Ok).
. You can also press and
to
(Ok)
(see
to