Display Indicator - UTStarcom UT611 User Manual

This key is used to key in "#" or pause symbol "P" (by pressing and
holding the key).
18. Microphone
Note: This is only a brief introduction to the keypad functions.
Please refer to the contents of this user guide for detailed
descriptions and operations.

1.4 Display Indicator

1. Shows the current signal strength. The higher the bar, the stronger
the signal.
2. Indicates an unread short message. It will flash when the message
box (Inbox) is full.
3. Indicates the PIM card has been inserted in the phone.
4. Indicates the Toll Lock function is active.
5. Means the Ring Mode is set to Only Vibrate.
Means the Ring Mode is set to Only Ring.
Means the Ring Mode is set to Ring and Vibrate or Ring after
Vibrate.
Means the Ring Mode is set to Silent.
1 2 3 4 5 6
Getting Started
7
8
11