Charge The Battery - UTStarcom UT611 User Manual

Getting Started
6. Indicates the Alarm function is active.
7. Indicates the battery charge level. The higher the bar, the greater
the battery power.
8. Content Display Area: Shows the phone numbers, short messages,
characters, or animations.

1.5 Charge the Battery

When the battery power is nearly exhausted, the battery indicator
will flash continuously, and the phone will generate a low battery alarm
sound (if the ring mode is not set to "Mute"). Those remind you that the
battery is running low and the phone will be switched off automatically. To
charge the battery, follow the steps below:
1. Connect the charger to a 220V AC wall outlet.
2. Connect the lead from the charger to the charging socket of the phone.
If the phone is in off state, the text "Charging..." is displayed on the
LCD screen, and at the same time the battery indicator bar keeps
scrolling on the LCD.
3. Charging is complete when the battery indicator bar stops scrolling.
The text "Fully Charged!" is also displayed on the LCD screen if the
phone is in off state.
12